| |
Introducing........
MTP Fiber Optic Backbone
Installation
Contents:
Product Summary
 Single
or Multi mode If you are going to install fiber optic
backbone cable into your network ,
please concern the following scenario:
FiberXpress manufactures
pre-terminated fiber optic cables . This new technology is twelve (12)
fibers or six(6) in one connector (MTP). Either single mode or multi-mode.
| MT-MT 12Fiber
Multimode |
| MT-MT 6 Fiber
Multimode |
| MT-MT 12Fiber Single
mode |
| MT-MT 6 Fiber Single
mode |
Lengths Include: |
Description:
-
These MT cables come on their own reel with pulling eye. Any manufacturers
cable can be used, and any type i.e.. riser, ribbon, armored etc. We
typically us AFL Telecommunications cable, but we have used Corning, Mohawk and many
others.
-
Once the cable is pulled through your inter-duct, the MT connectors are
connected into our cassette modules.
-
On one side of the cassette would be the MTP connector and on the other side
you specify what type you want: SC, ST MTRJ, FC, or Escon.
Simplex, Duplex, Male or Female.
-
The cassette modules will now fit into any one of our fiber
housings. Wall mount boxes or Rack mount boxes. Up to 144 fibers can
be housed within our fiber management boxes.
 
Other rack mount boxes are available, but not shown
Specifications:
| Connector Specifications |
Single Mode
|
Multimode |
| Insertion Loss |
0.25 dB Typical (all fibers)
0.75 dB Maximum (all fibers)
** As tested per ANSI/EIA - 455-171 Method 03
|
0.35 dB Typical (all fibers)
1.0 dB Maximum (all fibers)
**Tests conducted with flat, non-contacting connectors |
| Optical Return Loss |
>55 dB (8degree Angle Polish)
|
High return loss polish procedure available |
| Operating Temperature |
-40 DegreeC to +80 Degree C
|
-40 DegreeC to +80 Degree C |
| Rematability ( 1,000 Rematings) |
<0.2 dB change (per EIA-455-21A)
|
<0.2 dB change (per EIA-455-21A) |
Features & Benefits:
|
|
Plug &
Play
Pull cable, plug & play. Test
the system the same day you pull the cable. The elimination of many
labor hours. The polishing, cleaving and mounting of connectors eliminated..
A complete installation can be completed in short order. |
|
|
We would like to explain further the benefits of MTP solutions to you at
your convenience.
Contact: Sales for pricing and availability at sales@fiberXpress.com
Copyright © 2002 [FiberXpress, Inc.] All rights reserved.
Information in this document is subject to change without notice.
Other products and companies referred to herein are trademarks or registered
trademarks of their respective companies or mark holders.
MTP®
is a registered trademark of US Connec Ltd.
|
